The BAT Hammerhead is designed for PRS style competitions. It has a 75 degree bolt throw and has bolt stops for both 308 and 6BR/Dasher class cartridges. It weighs 34.6 oz, has a 3.03 inch magazine well that accepts AW style magazines as well as the 2.890 inch inside length UM DBM, an integrated 20 MOA picatinny rail, and a 1.062 x 18 TPI tenon.

The BAT Hammerhead is designed for PRS style competitions. It has a 75 degree bolt throw and has bolt stops for both 308 and 6BR/Dasher class cartridges. It weighs 34.6 oz, has a 3.03 inch magazine well that accepts AW style magazines as well as the 2.890 inch inside length UM DBM, an integrated 20 MOA picatinny rail, and a 1.062 x 18 TPI tenon.

The BAT Hammerhead is designed for PRS style competitions. It has a 75 degree bolt throw and has bolt stops for both 308 and 6BR/Dasher class cartridges. It weighs 34.6 oz, has a 3.03 inch magazine well that accepts AW style magazines as well as the 2.890 inch inside length UM DBM, an integrated 20 MOA picatinny rail, and a 1.062 x 18 TPI tenon.

The BAT Vesper is a best-in class action. It is made of 17-4 stainless steel and is fully nitrided. It is a very strong action with massive locking lugs. It has an integrated 20 MOA picatinny rail. The firing pin assembly can be removed without tools. The bolt is modular, which allows a low cost change to a different family of cartridges. This modular feature is not an accuracy robbing floating bolt head, but a very secure and stable bolt attachment system. The Vesper Long action is cut for a 3.95 inch UM DBM or a 4.00 inch Wyatts box, accepts Rem 700 style triggers, has a 1.25 x 16 TPI tenon, and weighs 26 oz.

The BAT Vesper is a best-in class action. It is made of 17-4 stainless steel and is fully nitrided. It is a very strong action with massive locking lugs. It has an integrated 20 MOA picatinny rail. The firing pin assembly can be removed without tools. The bolt is modular, which allows a low cost change to a different family of cartridges. This modular feature is not an accuracy robbing floating bolt head, but a very secure and stable bolt attachment system. The Vesper Long action is cut for a 3.95 inch UM DBM or a 4.00 inch Wyatts box, accepts Rem 700 style triggers, has a 1.25 x 16 TPI tenon, and weighs 26 oz.

The BAT Vesper is a best-in class action. It is made of 17-4 stainless steel and is fully nitrided. It is a very strong action with massive locking lugs. It has an integrated 20 MOA picatinny rail. The firing pin assembly can be removed without tools. The bolt is modular, which allows a low cost change to a different family of cartridges. This modular feature is not an accuracy robbing floating bolt head, but a very secure and stable bolt attachment system. The Vesper Long action is cut for a 3.95 inch UM DBM or a 4.00 inch Wyatts box, accepts Rem 700 style triggers, has a 1.25 x 16 TPI tenon, and weighs 26 oz.

The BAT Vesper is a best-in class action. It is made of 17-4 stainless steel and is fully nitrided. It is a very strong action with massive locking lugs. It has an integrated 20 MOA picatinny rail. The firing pin assembly can be removed without tools. The bolt is modular, which allows a low cost change to a different family of cartridges. This modular feature is not an accuracy robbing floating bolt head, but a very secure and stable bolt attachment system. The Vesper Medium action will accept our 3.400 inch UM DBM, accepts Rem 700 style triggers, has a 1.25 x 16 TPI tenon, and weighs 25 oz.

The BAT Vesper is a best-in class action. It is made of 17-4 stainless steel and is fully nitrided. It is a very strong action with massive locking lugs. It has an integrated 20 MOA picatinny rail. The firing pin assembly can be removed without tools. The bolt is modular, which allows a low cost change to a different family of cartridges. This modular feature is not an accuracy robbing floating bolt head, but a very secure and stable bolt attachment system. The Vesper Medium action will accept our 3.400 inch UM DBM, accepts Rem 700 style triggers, has a 1.25 x 16 TPI tenon, and weighs 25 oz.

The BAT Vesper is a best-in class action. It is made of 17-4 stainless steel and is fully nitrided. It is a very strong action with massive locking lugs. It has an integrated 20 MOA picatinny rail. The firing pin assembly can be removed without tools. The bolt is modular, which allows a low cost change to a different family of cartridges. This modular feature is not an accuracy robbing floating bolt head, but a very secure and stable bolt attachment system. The Vesper Medium action will accept our 3.400 inch UM DBM, accepts Rem 700 style triggers, has a 1.25 x 16 TPI tenon, and weighs 25 oz.

The BAT Vesper is a best-in class action. It is made of 17-4 stainless steel and is fully nitrided. It is a very strong action with massive locking lugs. It has an integrated 20 MOA picatinny rail. The firing pin assembly can be removed without tools. The bolt is modular, which allows a low cost change to a different family of cartridges. This modular feature is not an accuracy robbing floating bolt head, but a very secure and stable bolt attachment system. The Vesper Short action has a 75 degree bolt throw, will accept our 3.150 inch UM DBM, accepts Rem 700 style triggers, has a 1.62 x 18 TPI tenon, and weighs 24.8 oz.

The BAT Vesper is a best-in class action. It is made of 17-4 stainless steel and is fully nitrided. It is a very strong action with massive locking lugs. It has an integrated 20 MOA picatinny rail. The firing pin assembly can be removed without tools. The bolt is modular, which allows a low cost change to a different family of cartridges. This modular feature is not an accuracy robbing floating bolt head, but a very secure and stable bolt attachment system. The Vesper Short action has a 75 degree bolt throw, will accept our 3.150 inch UM DBM, accepts Rem 700 style triggers, has a 1.62 x 18 TPI tenon, and weighs 24.8 oz.

The BAT Vesper is a best-in class action. It is made of 17-4 stainless steel and is fully nitrided. It is a very strong action with massive locking lugs. It has an integrated 20 MOA picatinny rail. The firing pin assembly can be removed without tools. The bolt is modular, which allows a low cost change to a different family of cartridges. This modular feature is not an accuracy robbing floating bolt head, but a very secure and stable bolt attachment system. The Vesper Short action has a 75 degree bolt throw, will accept our 3.150 inch UM DBM, accepts Rem 700 style triggers, has a 1.62 x 18 TPI tenon, and weighs 24.8 oz.

The BAT Vesper is a best-in class action. It is made of 17-4 stainless steel and is fully nitrided. It is a very strong action with massive locking lugs. It has an integrated 20 MOA picatinny rail. The firing pin assembly can be removed without tools. The bolt is modular, which allows a low cost change to a different family of cartridges. This modular feature is not an accuracy robbing floating bolt head, but a very secure and stable bolt attachment system. The Vesper Short action has a 75 degree bolt throw, will accept our 3.150 inch UM DBM, accepts Rem 700 style triggers, has a 1.62 x 18 TPI tenon, and weighs 24.8 oz.

We will build on your action or can source a different action for you

We will build on your action or can source a different action for you

We will build on your action or can source a different action for you

We will build on your action or can source a different action for you

We will build on your action or can source a different action for you

We will build on your action or can source a different action for you

We will build on your action or can source a different action for you

We will build on your action or can source a different action for you

We will build on your action

We will build on your action or can source a different action for you

Customer supplied Tikka action!

Customer supplied Tikka action!

Customer supplied Tikka action!

The Tikka T3X action is a good value. It is a very good platform for a highly accurate and reliable budget friendly hunting rifle. With our UM Tikka DBM option, the Tikka can accept cartridges with a COAL of up to 3.500 inches. Action price includes a disassembly fee.

The Tikka T3X action is a good value. It is a very good platform for a highly accurate and reliable budget friendly hunting rifle. With our UM Tikka DBM option, the Tikka can accept cartridges with a COAL of up to 3.500 inches. Action price includes a disassembly fee.

The Tikka T3X action is a good value. It is a very good platform for a highly accurate and reliable budget friendly hunting rifle. With our UM Tikka DBM option, the Tikka can accept cartridges with a COAL of up to 3.500 inches. Action price includes a disassembly fee.

The Tikka T3X action is a good value. It is a very good platform for a highly accurate and reliable budget friendly hunting rifle. With our UM Tikka DBM option, the Tikka can accept cartridges with a COAL of up to 3.500 inches. Action price includes a disassembly fee.

Carbon Shell. The fore-end is 1.75” wide at the tip and rounded to a beaver tail that is flat and wide enough to accept a #7 / M24 barrel which is about 1.125″ diameter at the tip of the stock. Vertical grip with palm swell. Excellent stock for heavier recoiling rifles

Carbon Shell. The fore-end is 1.75” wide at the tip and rounded to a beaver tail that is flat and wide enough to accept a #7 / M24 barrel which is about 1.125″ diameter at the tip of the stock.

Carbon Shell. Comes standard with a 3.5” long arca rail. This stock is fitted with a hybrid version of Manners light adjustable spacer cheek system.

Carbon shell. High cheek weld for long range hunting optics; flat bottom for extreme stability when shooting in bags; slight inward taper on comb to add comfort for high-recoil calibers; and dual ambidextrous thumb shelves.

Comes with a carbon shell upgrade. Features a light weight adjustable cheek piece that has over 1” of adjustability, as well as a low profile picatinny rail and integrated ARCA rail. It also has a vertical grip and ambidextrous thumb shelves.

Comes with a carbon shell upgrade. Features a light weight adjustable cheek piece that has over 1” of adjustability, as well as a low profile picatinny rail and integrated ARCA rail. It also has a vertical grip and ambidextrous thumb shelves.

Comes with a carbon shell upgrade. The Mountain Tracker has a flat bottomed fore end and a low profile picatinny rail. It has a 3” ARCA rail located at its balance point for ease of use with a tripod. It also has a vertical grip, ambidextrous thumb shelves and negative comb.

Comes with a carbon shell upgrade. The Mountain Tracker has a flat bottomed fore end and a low profile picatinny rail. It has a 3” ARCA rail located at its balance point for ease of use with a tripod. It also has a vertical grip, ambidextrous thumb shelves and negative comb.

Comes with a carbon shell upgrade. Features a coffin top negative comb, a low profile picatinny rail, and integrated ARCA rail located at its balance point. Its also has a textured vertical grip, ambidextrous thumb shelves, and finger stop provide.

Dallas Lane designed the Nimrod stock. Highest in class comb to remove the need for an adjustable cheek piece. The comb has zero drop front to back. The bottom of the butt is long and flat for perfect rearward push and tracking. A 1″ longer than standard fore end spreads out your points of contact for more stability. Vertical grip with very large palm swell to avoid a death grip. 14″ LOP is longer for better shooting from the prone position.

This is a very popular chassis for PRS. Weights can be added to meet the 20-25 lb desired weight for your PRS rifle in 6 Dasher.

This is a very popular chassis for PRS. Weights can be added to meet the 20-25 lb desired weight for your PRS rifle in 6 Dasher.

Constructed of a magnesium alloy rifle stock/base, with a carbon fiber forend, a carbon fiber pistol grip and a foam filled carbon fiber buttstock. Weighs about 29 oz in a folding configuration.

Constructed of a magnesium alloy rifle stock/base, with a carbon fiber forend, a carbon fiber pistol grip and a foam filled carbon fiber buttstock. Weighs about 29 oz in a folding configuration.

We can get just about any chassis that you may like or use one that you provide

We can get just about any chassis that you may like or use one that you provide

We can get just about any stock that you may like or use one that you provide

We can get just about any stock that you may like or use one that you provide

Weight: 24 ounces, Length of Pull: 13.25 inches, Carbon Bedding Block, Negative Comb, Advanced Ergonomics, Vertical Grip, 3D Hex Recoil Pad, Dual Front Swivel Studs

Weight: 24 ounces, Length of Pull: 13.25 inches, Carbon Bedding Block, Negative Comb, Advanced Ergonomics, Vertical Grip, 3D Hex Recoil Pad, Dual Front Swivel Studs

Weight: 20 ounces, Length of Pull: 13.25 inches, Carbon Bedding Block, Negative Comb, Advanced Ergonomics, 3D Hex Recoil Pad

Weight: 20 ounces, Length of Pull: 13.25 inches, Carbon Bedding Block, Negative Comb, Advanced Ergonomics, 3D Hex Recoil Pad

The best prone position hunting shooting stock on the market. With a negative comb and a flat bottom buttstock parallel with a flat bottom fore end, the Rokstok virtually eliminates muzzle rise. Also, the vertical grip and 1.7 inch trigger reach make the Rokstok very comfortable for most shooters. Weight is 30-33 oz

The best prone position hunting shooting stock on the market. With a negative comb and a flat bottom buttstock parallel with a flat bottom fore end, the Rokstok virtually eliminates muzzle rise. Also, the vertical grip and 1.7 inch trigger reach make the Rokstok very comfortable for most shooters. Weight is 30-33 oz

Wood Rokstok in Walnut with Stippling and 1 inch Decellerator Pad. The best prone position hunting shooting stock on the market. With a negative comb and a flat bottom buttstock parallel with a flat bottom fore end, the Rokstok virtually eliminates muzzle rise. Also, the vertical grip and 1.7 inch trigger reach make the Rokstok very comfortable for most shooters. Weight is 30-35oz, depending on wood density

Wood Rokstok in Walnut with Stippling and 1 inch Decellerator Pad. The best prone position hunting shooting stock on the market. With a negative comb and a flat bottom buttstock parallel with a flat bottom fore end, the Rokstok virtually eliminates muzzle rise. Also, the vertical grip and 1.7 inch trigger reach make the Rokstok very comfortable for most shooters. Weight is 30-35oz, depending on wood density

Non Folding, Aluminum. A popular choice for those looking for a chassis system that can be configured for target shooting, hunting, or competition

Non Folding, Aluminum. A popular choice for those looking for a chassis system that can be configured for target shooting, hunting, or competition

Non Folding, Aluminum. A popular choice for those looking for a chassis system that can be configured for target shooting, hunting, or competition

Non Folding, Aluminum. A popular choice for those looking for a chassis system that can be configured for target shooting, hunting, or competition

When configured with a carbon fiber buttstock, smoke carbon grip, bag rider, thumbrest, and folding mechanism; the weight is about 36 oz. This chassis has a built-in bubble level, and a 1.5 inch dovetail (Arca-Swiss) in the fore end. Machined from AZ61A Magnesium

When configured with a carbon fiber buttstock, smoke carbon grip, bag rider, thumbrest, and folding mechanism; the weight is about 36 oz. This chassis has a built-in bubble level, and a 1.5 inch dovetail (Arca-Swiss) in the fore end. Machined from AZ61A Magnesium

The Trinity Rail brings together the 3 most popular bipod and tripod options on the market today: ARCA, SPARTAN, AND PICATINNY. With a radius cut and outer flats on the bottom, it will match well to a rounded or flat bottom stock. With 1.7″ of arca, a Spartan Precision quick release adaptor, and 2″ of usable picatinny, this is the most universal rifle mount ever created. Flexible bolt spacing of 1.5″ to 3.5″. 1.6 OZ 5″ OAL 6061 ALUMINUM Available with 10-32 or M LOK fasteners.

11″ Long, 3.4 OZ The most common sling stud thread size is 10-32 if you plan to reuse those spots for installation. The SRS Full Arca with bottom metal cut is the perfect setup for the weight conscious backcountry hunter. It’s the best ultralight Arca Rail option to cover all your bases in those difficult hunting situations we find ourselves getting into. The mounting side is slightly radiused to match the contour of any stock, and the ‘U’ cutout area is designed to wrap around the nose of your bottom metal to get closer to the balance center of you rifle for those tripod shots. Each rail comes with 3 sets of screws and claw nuts in the size you choose for your rail.

10″, 3.1 oz, Tactical Flat Bottom The SRS Tactical 10” Arca is a slim, flat bottom design. We designed this rail with pockets that make for an ultralight rail that looks great. This is 10” OAL and weighs only 3.1 oz. The 10” rail is supplied with 4 sets of fasteners. Made from 7075 Aluminum.

The most common sling stud thread size is 10-32 if you plan to reuse those spots for installation. The all new Hunters Rail is the perfect setup for the weight conscious backcountry hunter. With 2″ of picatinny rail, an integrated sling stud, and plenty of usable Arca rail for those tripod shots, it’s the best ultralight option to cover all your bases in those difficult hunting situations we find ourselves getting into. The mounting side is slightly radiused to match the contour of any stock, and the ‘U’ cutout area is designed to wrap around the nose of your bottom metal to get closer to the balance center of you rifle for those tripod shots. Each rail comes with 3 sets of screws and claw nuts in the size you choose for your rail. Short rail overall length- 10.625″, 3oz Long rail overall length- 11.5″, 3.1oz Anodized Black, with laser etched UM logo

4″, 1.0 oz The SRS family of arca rails are not only the lightest arca rails on the market, they are also the only arca rails available that match well to a rounded style hunting stock. The Arca + pic enables someone to have a single rail to run a bipod, and a tripod off. Made from 7075 aluminum, it is 4” OAL, and has a bolt spacing of 1.2” to 3.0”. These come with a sling stud hole. We like to use these at the fore end, for shots at a decline where you utilize the tripod to support the gun in lieu of a bipod. You get 1.7” of arca rail and 2” of pic rail. Weight is 1.0 oz.

Short flush mount spartan/picc rail. Weighs .6 ounces, 2.5″ long, supports screw spacing up to 1.5″.

Long flush mount spartan/picc rail

Long universal mount Spartan/Pic rail

4″, 1.2 oz, Slightly curved base for standard stock installation The SRS 4” Arca rail is made to exacting standards and is the strongest and lightest 4” arca rail on the market. Made from 7075 aluminum we were able to come up with an extremely light rail, while utilizing a full-length slot for flexible mounting options. Bolt spacing is 1” to 3.25”. Weight is 1.2 oz. 2 screws and nuts supplied depending on hardware selection, this rail has a curved base to fit standard stocks but can also be used on chassis. If you’re looking for a flat bottom rail, please click here.

4″, 1.3 oz, Tactical Flat Bottom The SRS Tactical 4” Arca has a slim flat bottom design. We designed this with light weighting pockets that make for an ultralight rail that looks great. This is 4” OAL and weighs 1.3 oz. Max bolt spacing is 3.25”. If you have a standard stock, please check out this rail. Made from 7075 aluminum.

1.7″, .4 oz The SRS Outdoorsmans Mini rail (ODM rail) is the only available direct mount option for shooting off an ODM tripod. These are 1.7” OAL, and allow for a 1”-1.2” bolt spacing. Weight is .4 oz. and 2 screws and nuts are supplied depending on hardware selection. This rail has a curved base to fit standard stocks but can also be used on chassis.

4.25″, .71 oz The SRS long picatinny rail has a standard sling stud and an integrated QD flush cup. It has a curved bottom for standard stock applications but also works great on flat bottom chassis applications. It is 4.25” OAL and has bolt spacing of 1.25”-3.25”. Weight is .71 oz. and 10-32 (2) screws are included by default. You can also choose 1/4-20 and M-LOK as hardware options.

The SRS medium picatinny rail has a standard sling stud and an integrated QD flush cup. It has a curved bottom for standard stock applications but also works great on flat bottom chassis applications. It is 3.5” OAL and has bolt spacing of 1.25”-2.5”. Weight is .6 oz. and 10-32 (2) screws are included by default. You can also choose 1/4-20 and M-LOK as hardware options.

1.7″, .55 oz, Slightly curved base for standard stock installation The SRS mini arca is the lightest solution on the market to shoot off of a tripod. Made from 7075 aluminum, we were able to design an incredibly light, but tough rail at only .55 oz. These work in Arca Swiss style tripod heads. They are 1.7” OAL, and has a slot for bolt spacing up to 1.2″. 2 screws and nuts supplied depending on hardware selection, this rail has a curved base to fit standard stocks but can also be used on chassis.

Use your own or we can source a different one

The SRS Arca Balance is made with one purpose, to give you the lightest and sleekest option for a rail at the balance point of your rifle. Made from 7075 aluminum, we were able to add light weighting pockets while retaining strength. This rail is designed to wrap around the front action screw and mounts with two bolts in front of the recoil lug. This rail has a flat bottom. – 1.05 oz. – 3.5″ OAL – Only .250″ thick

4″, 1.2 oz, Slightly curved base for standard stock installation The SRS 4” Arca rail is made to exacting standards and is the strongest and lightest 4” arca rail on the market. Made from 7075 aluminum we were able to come up with an extremely light rail, while utilizing a full-length slot for flexible mounting options. Bolt spacing is 1” to 3.25”. Weight is 1.2 oz. 2 screws and nuts supplied depending on hardware selection, this rail has a curved base to fit standard stocks but can also be used on chassis. If you’re looking for a flat bottom rail, please click here.

4″, 1.3 oz, Tactical Flat Bottom The SRS Tactical 4” Arca has a slim flat bottom design. We designed this with light weighting pockets that make for an ultralight rail that looks great. This is 4” OAL and weighs 1.3 oz. Max bolt spacing is 3.25”. If you have a standard stock, please check out this rail. Made from 7075 aluminum.

1.7″, .4 oz The SRS Outdoorsmans Mini rail (ODM rail) is the only available direct mount option for shooting off an ODM tripod. These are 1.7” OAL, and allow for a 1”-1.2” bolt spacing. Weight is .4 oz. and 2 screws and nuts are supplied depending on hardware selection. This rail has a curved base to fit standard stocks but can also be used on chassis.

1.7″, .55 oz, Slightly curved base for standard stock installation The SRS mini arca is the lightest solution on the market to shoot off of a tripod. Made from 7075 aluminum, we were able to design an incredibly light, but tough rail at only .55 oz. These work in Arca Swiss style tripod heads. They are 1.7” OAL, and has a slot for bolt spacing up to 1.2″. 2 screws and nuts supplied depending on hardware selection, this rail has a curved base to fit standard stocks but can also be used on chassis.

Use your own or we can source a different one

Standard M5 footprint. Side Release Lever- unaffected by recoil due to patent pending design. All parts are 6061 Aluminum, fasteners are stainless steel. 3 Round Single stack, Center Feed for all mags. Type 3 Hardcoat Anodize on DBM and Mags, release button and mag lower plate are Cerakoted gray as pictured. Custom Cerakote and laser engraving options are available per customer request

Standard M5 footprint. Side Release Lever- unaffected by recoil due to patent pending design. All parts are 6061 Aluminum, fasteners are stainless steel. 3 Round Single stack, Center Feed for all mags. Type 3 Hardcoat Anodize on DBM and Mags, release button and mag lower plate are Cerakoted gray as pictured.

Fits a standard M5 inlet. Designed for Wyatts extended length box magazines. Reversible and adjustable mag/floorplate catch

Standard M5 footprint. Side Release Lever- unaffected by recoil due to patent pending design. All parts are 6061 Aluminum, fasteners are stainless steel. 3 Round Single stack, Center Feed for all mags. Type 3 Hardcoat Anodize on DBM and Mags, release button and mag lower plate are Cerakoted gray as pictured.

Fits a standard M5 inlet. Designed for Wyatts extended length box magazines. Reversible and adjustable mag/floorplate catch

Fit a standard M5 inlet. Designed for Wyatts extended length box magazines. Reversible and adjustable mag/floorplate catch

Standard factory Tikka bottom plastic

Fits a standard M5 inlet. Designed for Wyatts extended length box magazines. Reversible and adjustable mag/floorplate catch.

A Chassis has the bottom metal built in and only needs a magazine

Use your own bottom metal or we can source a different one

Use your own bottom metal or we can source a different one

2.89 inch internal length for standard (.473) boltface cartridges

3.15 inch internal length for standard (.473) boltface cartridges

2.89 inch internal length for short magnum (.532) boltface cartridges

3.15 inch internal length for short magnum (.532) boltface cartridges

3.26 inch internal length for standard (.473) boltface cartridges

3.26 inch internal length for magnum (.532) boltface cartridges

3.4 inch internal length for standard (.473) boltface cartridges

3.4 inch internal length for magnum (.532) boltface cartridges

3.775 inch internal length for magnum (.532) boltface cartridges

3.95 inch internal length for magnum (.532) boltface cartridges

3.7755 inch internal length for Lapua boltface (.585) cartridges

3.95 inch internal length for Lapua (.585) boltface cartridges

Plastic factory Tikka magazine

3.5 inch internal length for standard (.473) boltface cartridges. All parts are 6061 Aluminum, fasteners are stainless steel. Standard mag holds 5 rounds, Magnum holds 4 rounds, mags do not rattle. Type 3 Hardcoat Anodize on DBM and Mags. Custom Cerakote and laser engraving options are available per customer request

3.5 inch internal length for standard magnum All parts are 6061 Aluminum, fasteners are stainless steel. Standard mag holds 5 rounds, Magnum holds 4 rounds, mags do not rattle. Type 3 Hardcoat Anodize on DBM and Mags. Custom Cerakote and laser engraving options are available per customer request

3.410″ internal length for magnum (.532)(.473) boltface cartridges. Stainless steel internal spring 3+1 capacity with WSM or similar cases. Three stainless steel screws secure the magazines halves to each other. Internal shoulder stops are modified to allow use of a 7PRC as well as 300WSM/6.5PRC/6.5SAUM/7SAUM/7WSM and other similar cartridges. *WILL NOT WORK WITH 7REM MAG OR 300 WINMAG

Wyatts extended short action magazine boxes have internal lengths from 3.00 to 3.10 inches

Wyatts Mid-Length box, also known as the SA Mid Length box, has an internal dimension of 3.25 inches.

Wyatts extended long action magazine boxes have internal lengths from 3.7 to 4.0 inches

2.325 inch internal length for use with 223 (.375), PPC (.442), or standard (.473) cartridges that are very short such as the 223 Rem, 300 BO, and 6.8 SPC

2.89 inch internal length for standard (.473) boltface cartridges in a chassis

2.950 inch internal length for short magnum (.532) boltface cartridges in a chassis

3.25 inch internal length for magnum (.532) boltface cartridges. 3-round capacity

3.25 inch internal length for standard (.473) boltface cartridges. 3-round capacity

3.56 inches internal length for Tikka actions in a chassis. Standard (.473) boltface

3.56 inches internal length for Tikka actions in a chassis. Magnum (.532) boltface

3.75 inch internal length for standard bolt face cartridges in a chassis

3.775 inch internal length for belted magnum (.532 boltface) cartridges in a chassis

3.775 inch internal length for RUM and PRC cartridges in a chassis

3.775 inch internal length for cartridges with a Lapua boltface in a chassis

Use your own magazine

Use your own magazine

Use your own magazine

Use your own magazine

Use your own magazine

Use your own magazine

Sporter contour similar to a Benchmark #5 or Krieger #3

Sporter contour similar to a Benchmark #4 or Krieger #4

Sporter contour similar to a Benchmark #5 or Krieger #5

Sporter contour similar to a Benchmark #6 or Krieger #6

Sporter contour similar to a Benchmark #7 or Krieger #8

The Sendero contour varies a bit among manufacturers. While they are all a sporter taper, muzzle diameters vary from .83 to .90 depending on the brand

We can chamber most any contour you would like

The Sendero contour varies a bit among manufacturers. While they are all a sporter taper, muzzle diameters vary from .83 to .90 depending on the brand

This contour varies a bit among manufacturers. While they are all a sporter taper, muzzle diameters vary depending on the brand

This contour varies a bit among manufacturers. While they are all a sporter taper, muzzle diameters vary from depending on the brand

Single point cut rifled barrels, double hand lapped after reaming and rifling.

Benchmark cut-rifled barrel

Benchmark carbon wrapped barrel

CarbonSix carbon wrapped barrel

Hell's Canyon carbon wrapped barrel

Proof carbon wrapped barrel

Pick a different barrel or supply your own

Plain barrel, no fluting

Lever Type: Curved (has ridges on finger face) or Pro Curved (flat on finger face). Pull Weight: 1.0lbs-3.5lbs.

Lever Type: Curved (has ridges on finger face) or Pro Curved (flat on finger face). Pull Weight: 1st stage: 8 to 24 oz, 2nd stage: 8 to 32 oz.

Lever Type: Curved (has ridges on finger face) or Pro Curved (flat on finger face). Pull Weight: 4-32 oz.

Lever Type: Curved (has ridges on finger face) or Pro Curved (flat on finger face). Pull Weight: 1st stage: 4 to 20 oz, 2nd stage: 4 to 24 oz.

Factory Tikka Triggers can usually be set to the 3-4 lb range

This lightweight trigger spring reduces the pull weight of factory Tikka triggers to 1.5 to 2.5 lbs

Pull weight first stage: 8 oz to 1 lb, second stage, 1 to 2.5 lbs

w

Pull weight: 10 oz to 4.4 lbs

10 ounces to 3.4 lbs

Pull Weight: 1 lbs – 4.5 lbs

Pull weight: 3.5oz - 2.2lbs

Pull weight: 2.5oz - 1lbs

Use your own trigger or we can source a different one

Use your own trigger or we can source a different one

Multiple reticle options, FFP or SFP, passes drop test, weighs 28.6 oz

Multiple reticle options, FFP or SFP, passes drop test, weighs 28.3 oz

Three reticle options, FFP or SFP, passes drop test, weighs 26.4 oz

Use your own scope or we can source a different one

Machined from 7075 Aluminum with Nitrided hardware. Machined grade 5 Titanium recoil lug and clamp. Type 3 Hardcoat Anodize on all aluminum surfaces. Integrated scope level in the base. 9/64″ driver bit and blue thread locker included. Available in 30mm, 34mm, 35mm and heights from low to extra high. Weight: 4.5 oz

Rings attach directly to the Tikka Dovetail. Each package comes with: 2 Scope Rings, 9/64″ Driver Bit, Blue Thread Locker, 2 x threaded reoil pins, 2 standard recoil pins. Made from 6061 aluminum and Type 3 Hardcoat Anodize on all surfaces. Nitrided. Threaded and standard recoil pins included. Weight is 4.5 ounces for the pair.

Any other scope ring, with either a direct or pic rail attachment

Machined from 7075-T6 aluminum. Scope Rings are .8” wide (4 screw cap). Type III Hardcoat Anodized matte black. Grade 8 T-25 Torx® fasteners.

Made from billet 6061 T6 aluminum. Machined with a clamp and recoil lug made from 7075 aluminum.

Made from billet 6061 T6 aluminum. Machined with a clamp and recoil lug made from 7075 aluminum. Offset Level.

Direct mount. Made from billet 6061 T6 aluminum. 25 MOA

Direct mount. Made from billet aluminum. 25 MOA. Weight is 2-3 oz.

The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature. The BT65-LW17 mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.”

The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature. The BT69-LW17 mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.”

The BT72-LW17 Super CAL (Cant And Loc) Atlas Bipod does not PAN. This model mounts directly to any 1913 style Picatinny rail via the included ADM-170-S Lever. Includes patented 45° leg positions, non-rotating legs, optional quick change feet and “Hold What You Move Technology™.” It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components. Available in black only. We choose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.”

The MDT GRND-Pod (pronounced “Ground-Pod”) was developed for the shooter wanting a stable and secure platform to shoot off of without breaking the bank. The MDT GRND-Pod is designed to adapt to the picatinny and RRS Dovetail/ARCA mounting interfaces and offers shooters a one hand adjustable height range from 4.5″ – 9″, with 4-locking positions in the 0°, 50°, 90° and 180° positions. The MDT GRND-Pod legs are also Atlas/Ckye-Pod foot compatible and can be fully extended just by pulling down on the legs in any position!

The MDT GRND-Pod (pronounced “Ground-Pod”) was developed for the shooter wanting a stable and secure platform to shoot off of without breaking the bank. The MDT GRND-Pod is designed to adapt to the picatinny and RRS Dovetail/ARCA mounting interfaces and offers shooters a one hand adjustable height range from 4.5″ – 9″, with 4-locking positions in the 0°, 50°, 90° and 180° positions. The MDT GRND-Pod legs are also Atlas/Ckye-Pod foot compatible and can be fully extended just by pulling down on the legs in any position!

Carried off the rifle and attached in seconds, the Javelin Pro Hunt Tac features spring-loaded ratchet-style tac legs so hunters can quickly adjust the bipod’s height. The Javelin Pro Hunt Tac is ideal for hunters needing to travel long distances through woodlands and mountainous terrain; it quickly snaps into place via our patented Spartan Magnetic Attachment System and is easily swapped to other rifles, making it the only bipod you’ll ever need. And when the time comes to take your shot, the single button Leg Lock-Out feature opens the legs and ensures they stay in the fixed shooting position.

Carried off the rifle and attached in seconds, the Javelin Pro Hunt Tac features spring-loaded ratchet-style tac legs so hunters can quickly adjust the bipod’s height. The Javelin Pro Hunt Tac is ideal for hunters needing to travel long distances through woodlands and mountainous terrain; it quickly snaps into place via our patented Spartan Magnetic Attachment System and is easily swapped to other rifles, making it the only bipod you’ll ever need. And when the time comes to take your shot, the single button Leg Lock-Out feature opens the legs and ensures they stay in the fixed shooting position.

Use your own bipod or we can source a different one

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

The Pro line of brakes have been designed for maximum recoil reduction and provide you the most recoil control per ounce on the planet! Save your shoulder and install a PRO Muzzle brake. SS PRO brakes are manufactured from 416 Stainless Steel, and TI PRO brakes are manufactured from Grade 5 64ALV Titanium. All brakes are hand polished, deburred, and inspected for quality one brake at a time. A standard brake has a cleaner look, is simpler to remove and replace, but can only be used on the barrel that it was originally fitted.

Use your own brake or specifiy a different one

Use your own brake or specify a different one

Pick any cerakote color that is available.

The stock will have a base coat with 1-3 colors sponged on. The barrel can be any single color, but looks best with one of the colors used on the stock.

Pick any two cerakote colors or sponge pattern.

We have many cerakote patterns available.

No cerakote, just the basic colors of the the stock, action, barrel, and other parts

Pelican Storm IM3410 Black case with Unknown Munitions logo in lid and laser cut rifle area.

Shifting from the decades old wedge shape, we’re finally bringing the single rifle case into the current generation. Our focus was to create a simple, usable case made for all firearms, including the modern sporting rifle and all its possible attachments.

Use your own case or we can source a different case

A +P throat can increase velocity for many cartridges from 75 - 150 fps with handloads. This is a process Defensive Edge developed and it works well. However, a +P throat will actually decrease velocity with factory loads. NOTE: We do not recommend +P on the 6 UM-30 and 6 UM-40. Call to discuss which cartridges respond well to a +P throat.

Pockets are milled in body and ejection port opened up, saving 4 oz of weight. Serial number is remarked in accordance with ATF specifications. Bolt fluted with either slow spiral, fast spiral, or diamond. Action is then nitrided.

Pockets are milled in body and ejection port opened up, saving 4 oz of weight. Serial number is remarked in accordance with ATF specifications. Bolt fluted with either slow spiral, fast spiral, or diamond. Action is then coated in elite cerakote.

Bolt fluted with either slow spiral, fast spiral, or diamond.

Pockets are milled in body and ejection port opened up, saving 4 oz of weight. Serial number is remarked in accordance with ATF specifications.

Action is fully nitrided to increase wear resistance.